Cleaned up debugging commands

Modules/FDEM1D/src/EMEarth1D.cpp

 
         // Determine number of lagged convolutions to do
         int nlag = 1; // (Key==0)  We need an extra for some reason for stability? Maybe in Spline?
-        Real lrho ( 1.01* rhomax );
+        Real lrho ( 1.0 * rhomax );
         while ( lrho > rhomin ) {
             nlag += 1;
             lrho *= Hankel->GetABSER();
-            //std::cout << "lrho\t" << lrho << std::endl;
         }
-        // Key variant
-//        Real lamMin = Filter.base(1)/rMax;
-//        Real lamMax = Filter.base(end)/rMin;
-//        auto nLambda = ceil(log(lamMax/lamMin)/log(filterSpacing))+1;
-        //nlag = 3;
-        //std::cout << "nlag\t" << nlag << std::endl;
-
-        //int nlag = rhomin
+
         auto tDipole = antenna->GetDipoleSource(0);
         tDipole->SetKernels(ifreq, FieldsToCalculate, Receivers, irec, Earth);
 
         // Instead we should pass the antenna into this so that Hankel hass all the rho arguments...
-        Hankel->ComputeLaggedRelated( 1.01* rhomax, nlag, tDipole->GetKernelManager() );
-
-        //std::cout << "After! " << Hankel->GetAnswer() << std::endl;
+        Hankel->ComputeLaggedRelated( 1.0*rhomax, nlag, tDipole->GetKernelManager() );
 
         // Sort the dipoles by rho
         for (int idip=0; idip<antenna->GetNumberOfDipoles(); ++idip) {
-        //for (int idip=0; idip<1; ++idip) {
             auto tDipole = antenna->GetDipoleSource(idip);
             tDipole->SetKernels(ifreq, FieldsToCalculate, Receivers, irec, Earth);
             // Pass Hankel2 a message here so it knows which one to return in Zgauss!
             Real rho = (Receivers->GetLocation(irec).head<2>() - tDipole->GetLocation().head<2>()).norm();
-            //std::cout << " in Lagged " <<  rho << "\t" << rhomin << "\t" << rhomax << std::endl;
             Hankel->SetLaggedArg( rho );
             tDipole->UpdateFields( ifreq,  Hankel, wavef );
         }
-        //std::cout << "Spline\n";
-        //std::cout << Receivers->GetHfield(0, irec) << std::endl;
     }
 
     //////////////////////////////////////////////////////////

Modules/FDEM1D/src/FHTAnderson801.cpp

         DeleteSplines();
 
         // Now do cubic spline
-        // TODO Check that knots are set in right order, Eigen has reverse()
-        std::cout << "Arg\n" << Arg << std::endl;
-        std::cout << "Zans\n" << Zans << std::endl;
         for (int ii=0; ii<Zans.cols(); ++ii) {
             auto Spline = CubicSplineInterpolator::NewSP();
             Spline->SetKnots( Arg, Zans.col(ii).real() );

Modules/FDEM1D/src/FHTKey201.cpp

         //kernelVec = KernelManager->GetSTLVector();
         int nrel = (int)(KernelManager->GetSTLVector().size());
         Eigen::Matrix<Complex, 201, Eigen::Dynamic > Zwork;
-        // TODO, if we want to allow lagged, then 1 below should be nlag
         Zans= Eigen::Matrix<Complex, Eigen::Dynamic, Eigen::Dynamic>::Zero(1, nrel);
         Zwork.resize(201, nrel);
         VectorXr lambda = WT201.col(0).array()/rho;
                 // Zwork* needed due to sign convention of filter weights
  			    Zwork(ir, ir2) = std::conj(KernelManager->GetSTLVector()[ir2]->RelBesselArg(lambda(ir)));
             }
-
         }
 
         // We diverge slightly from Key here, each kernel is evaluated seperately, whereby instead
         for (int ir2=0; ir2<nrel; ++ir2) {
             Zans(0, ir2) = Zwork.col(ir2).dot(WT201.col(KernelManager->GetSTLVector()[ir2]->GetBesselOrder() + 1))/rho;
         }
-        std::cout << "rho\n" << rho << std::endl;
-        std::cout << "Zans\n" << Zans << std::endl;
-        exit(EXIT_SUCCESS);
         return ;
     }		// -----  end of method FHTKey201::ComputeRelated  -----
 
     //--------------------------------------------------------------------------------------
     void FHTKey201::ComputeLaggedRelated ( const Real& rho, const int& nlag, std::shared_ptr<KernelEM1DManager> KernelManager ) {
 
-        //std::cout << "rho max\t " << rho << std::endl;
-        //Real rho = 214.963;
-
         int nrel = (int)(KernelManager->GetSTLVector().size());
 
         Eigen::Matrix< Complex, Eigen::Dynamic, Eigen::Dynamic > Zwork;
-        //Eigen::Matrix<Complex, 201+nrel, Eigen::Dynamic > Zwork;
         Zans= Eigen::Matrix<Complex, Eigen::Dynamic, Eigen::Dynamic>::Zero(nlag, nrel);
         Zwork.resize(201+nlag, nrel);  // Zwork needs to be expanded to filter length + nlag
 
         int NumFun = 0;
         int idx = 0;
 
-        //std::cout << lambda.transpose() << std::endl;
-
         VectorXr Arg(nlag);
         Arg(nlag-1) = rho;
         for (int ilag=nlag-2; ilag>=0; --ilag) {
             Arg(ilag) = Arg(ilag+1) * GetABSER();
         }
-        //std::cout << "Arg\t" << Arg << std::endl;
 
         // Get Kernel values
         for (int ir=0; ir<lambda.size(); ++ir) {
             ++NumFun;
             KernelManager->ComputeReflectionCoeffs(lambda(ir), idx, rho);
             for (int ir2=0; ir2<nrel; ++ir2) {
-                // Zwork* needed due to sign convention of filter weights
- 			    //Zwork(ir, ir2) = std::conj(KernelManager->GetSTLVector()[ir2]->RelBesselArg(lambda(ir)));
  			    Zwork(ir, ir2) = std::conj(KernelManager->GetSTLVector()[ir2]->RelBesselArg(lambda(ir)));
             }
         }
         // in the interests of making them as generic and reusable as possible. This approach requires slightly
         // more multiplies, but the same number of kernel evaluations, which is the expensive part.
         // Inner product and scale
-        int ilagr = nlag-1;
+        int ilagr = nlag-1; // Zwork is in opposite order from Arg
         for (int ilag=0; ilag<nlag; ++ilag) {
             for (int ir2=0; ir2<nrel; ++ir2) {
-                //Zans(ilag, ir2) = Zwork.col(ir2).dot(WT201.col(KernelManager->GetSTLVector()[ir2]->GetBesselOrder() + 1))/rho;
-                //Zans(ilag, ir2) = Zwork.col(ir2).dot(WT201.col(KernelManager->GetSTLVector()[ir2]->GetBesselOrder()+1))/Arg(ilag);
-                // Segment
-                //std::cout << Zwork.col(ir2).segment(ilag,201).transpose() << std::endl;;
-                //WT201.col(KernelManager->GetSTLVector()[ir2]->GetBesselOrder()+1).segment(ilag,201);// / Arg(ilag);
                 Zans(ilagr, ir2) = Zwork.col(ir2).segment(ilag,201).dot( WT201.col(KernelManager->GetSTLVector()[ir2]->GetBesselOrder()+1) ) / Arg(ilagr);
             }
             ilagr -= 1;
         }
-        //std::cout << "Zans" << Zans << std::endl;
-        //exit(EXIT_SUCCESS);
 
         // make sure vectors are empty
         splineVecReal.clear();
         splineVecImag.clear();
 
         // Now do cubic spline
-        // TODO Check that knots are set in right order, Eigen has reverse()
-        //std::cout << "Arg\n" << Arg << std::endl;
-        //std::cout << "Arg.reverse()\n" << Arg.reverse() << std::endl;
-        //VectorXr Argr = Arg.reverse();
-        //std::cout << "Zans\n" << Zans << std::endl;
-        //exit(EXIT_SUCCESS);
         for (int ii=0; ii<Zans.cols(); ++ii) {
             auto SplineR = CubicSplineInterpolator::NewSP();
             SplineR->SetKnots( Arg, Zans.col(ii).real() );